Complete 8 Gauge Amplifier Installation Kit
The KnuKonceptz KOL-AK8 amp installation kit includes all the basic components needed to install one 2 channel or Mono amplifier in your vehicle. This amp kit features our Kolossus Fleks power and ground wire and Kord speaker wire.
KnuKonceptz Kolossus amp installation kit's feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK8 amp kit provides 18 feet of blue power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 60A fuse is provided within the KOL-AK8 amp install kit. The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 18' as one unit and using the FH-44 to "splice" a few feet of wire)
Signal for your 2 channel amplifier installation kit is carried by the Klarity Kable 5 Meter (16.25') RCA Cable. The Klarity RCA Cable is a copper braid shielded coaxial RCA that uses a molded metal RCA terminal with strain relief for a durable, low loss connection to your head unit and amplifier. A remote turn on lead is built into the Klarity RCA Cable making for less cables to run during the installation of your amp kit. This wire is connected to your radio's power antenna lead or amp turn on lead (refer to your head unit's manual) Your amplifier's output is sent through KnuKonceptz Kord 14 gauge speaker wire, 20 feet of 14 gauge ultra flex blue speaker wire is included with the kit.
Complete 8 Gauge Amplifier Installation Kit with Blue / Black Power wire. Kit Includes
Please click on a product quesion below to reveal the answer.
How many watts can this amp kit handle?
At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 25A fuses = 50A total draw) If this number is under 60A, this kit will fit your application. If over 60A, this amp install kit will not work for that application, that installation would require 4 gauge or larger wire.
Can I alter this kit in any way before purchasing?
Our amp kits are made in large batches to reduce cost, which is passed onto you. We can not alter them in any way. Should you need to make alterations, you would have to purchase the items individually from our shopping cart.