Complete 4 Gauge Amplifier Installation Kit
The KnuKonceptz KOL-AK4 amp installation kit includes all the basic components needed to install one 2 channel or Mono amplifier in your vehicle. This amp kit features our Kolossus Fleks power and ground wire and Kord speaker wire.
KnuKonceptz Kolossus amp installation kit's feature our top of the line Kolossus Fleks power and ground cables. Made up of ultra flexible pvc and ultra fine tinned strands of oxygen free copper (OFC), the Kolossus Kable is the standard for which all others are compared to. The KOL-AK4 amp kit provides 18 feet of blue power wire and 3 feet of translucent black (smoke) ground wire. The KnuKonceptz FH-44 fuse holder with a 120A Mini ANL fuse is provided within the KOL-AK4 amp install kit, but can be upgraded to a maximum of 150A Mini ANL fuse (sold separately MANL-150). The fuse holder does not come installed within the cable, this allows the installer to place the inline fuse holder in an optimum location during installation. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run (leaving the 16.5' as one unit and using the FH-44 to "splice" a few feet of wire)
Signal for your 2 channel amplifier installation kit is carried by the Bassik Kable 5 Meter (16.25') RCA Cable. The Bassik RCA Cable is a copper braid shielded coaxial RCA that uses a double molded RCA terminal with strain relief for a durable, low loss connection to your head unit and amplifier. A remote turn on lead is built into the Bassik RCA Cable making for less cables to run during the installation of your amp kit. This wire is connected to your radio's power antenna lead or amp turn on lead (refer to your head unit's manual) Your amplifier's output is sent through KnuKonceptz Kord 12 gauge speaker wire, 20 feet of 12 gauge blue speaker wire is included with the kit.
Amp Install Kit Includes:
Please click on a product quesion below to reveal the answer.
How many watts can this amp kit handle?
At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. There are many amp manufactures and not all of them represent the output of their product accurately. Please refer to your amplifier's fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (three 25A fuses = 75A total draw) If this number is under 120A, this kit will fit your application. If over 120A, but less then 150A, this kit will work, but a 150A mini-ANL fuse is required (sold separate) If over 150A, this amp install kit will not work for that application, that installation would require 2 gauge or larger wire.
I received my amp installation kit, but the Mini-ANL fuse is not in the FH-44 inline fuse holder?
The Mini-ANL fuse is located in the parts bag along with the ring terminals and snap bushings. It is not installed so that the installer can complete the install and add the fuse after all connections are made.
Can I alter this kit in any way before purchasing?
Our amp kits are made in large batches to reduce cost, which is passed onto you. We can not alter them in any way. Should you need to make alterations, you would have to purchase the items individually from our shopping cart.