Fuse Distribution Block 2 Way 4 to 8 Gauge Out

Welcome to our KNU site!

Bassik 2 Way 4 Gauge Fuse Distribution Block

$8.49

Product code: BK-424

Fuse Output 1

Fuse Output 2

Clear

Choose attributes above to add to cart.

Warranty

One Year warranty on all KnuKonceptz products

Item description

Bassik – simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective! The BK-424 accepts 4 gauge and 8 gauge power wire without the use of adapters on both the input and output side of this distribution block. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design.

The BK-424 fuse block has dual inputs which can be used to link additional blocks together to make 4 or 6 way fuse distribution simple. Each output is fused by a Mini-ANL style fuse with a max load of 150A per circuit.

In need of a 4 way ground block? Place our Mini-Links into the BK-424 and you now have yourself a 4 way ground block that accepts 4 gauge and 8 gauge!

Item description

Bassik - simple, clean, easy. This is the foundation of what KnuKonceptz calls Bassik. Easy to install, simple to connect and cost effective! The BK-424 accepts 4 gauge and 8 gauge power wire without the use of adapters on both the input and output side of this distribution block. Oversized allen screws can secure either gauge without any modification or additional parts to complicate the design.

In need of a 4 way ground block? Place our Mini-Links into the BK-424 and you now have yourself a 4 way ground block that accepts 4 gauge and 8 gauge!

Choose Your Fuse: Fuses are always included at no extra charge! Need help calculating which size you need? See our FAQ!

You’re Grounded: KnuKonceptz makes your wiring clean with our ground links. Pair up your fuse block with these brass buss bars and turn your fuse block into a ground block.

No Adapters Needed: Internal adapters add contact points that could increase resistance within your electrical system, sucking valuable current from your amplifiers.

Specifications

UBT Battery
Finish	Nickel Chrome
Outputs	0 Gauge, 4 Gauge, 8 Gauge + OEM Connection
Dimensions	2.625″(W) x 2.0″(H) x 1.125″(D) with cover
Warranty	1 Year
Insulated Cover Included	Yes

Description
Additional information

Description

In need of a 4 way ground block? Place our Mini-Links into the BK-424 and you now have yourself a 4 way ground block that accepts 4 gauge and 8 gauge!

Additional information

Weight	0.25 lbs
Fuse Output 1	Ground Link, 20 Amp, 30 Amp, 40 Amp, 50 Amp, 60 Amp, 80 Amp, 100 Amp, 120 Amp, 150 Amp
Fuse Output 2	Ground Link, 20 Amp, 30 Amp, 40 Amp, 50 Amp, 60 Amp, 80 Amp, 100 Amp, 120 Amp, 150 Amp
Application	Car, Marine, Solar
Usage	Power

Frequent questions

How do I determine what size fuses I need for this fuse block?

Each output of a fuse distribution block normally is connected to a single amplifier. Each amplifier will have either a fuse on board or the manufacture will state within the manual’s installation guide or spec sheet what the max fuse rating or current draw of the amplifier is. If your amp has three 30A fuses on boards, you want a 100A fuse for that particular output of this block (90A is not an option we offer). If the second amp has a single 40A fuse, then a 40A fuse goes into that output of the block and thus a 100A and 40A would be required.
This block has two inputs, do I need to use both?

The BK-424 has two input ports, only one input is required to power both fused outputs. The second port is optional and can be used to connect additional rear mounted batteries, a capacitor, or to daisy chain additional blocks together. Having the second port makes this fuse block more flexible to the installer than a single port block.
Can I use this block as a ground block?

Yes, KnuKonceptz offers ground links to turn this block into a 2 Way Ground Block. These Mini-ANL buss bars replace the fuse and allow the BK-424 to be used from a common grounding point.