Order Online Or Call Today - 216.310.6555
KonFUSED 4 Way Fused Distribution Block
The KNF60 uses 6 isolated ports in its patent pending design. Each is then linked, fused, or left open to configure the block for your application's demands. Utilizing three platforms to fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses allowing up to 300A of protect per circuit!
Each port on the KNF60 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can be easily be routed through one block!
The KNF-60x4 is the four way fused power distribution block designed for several large gauge in and outputs. Included with this item are your choice is 4 sets of fuses and 2 Mini-ANL Links. The KNF-60x4 has two total inputs, only one is required to power all three outputs. The additional port can be used to connect to additional batteries within your system
*Pat No, D695698, additional Pat Pending
Dimensions L x W x H: 4.9" x 4.6" x 1.85"
Total Ports: 6
Fittings Included: Four 0 Gauge, Two 4 Gauge
Fuse Type: Mini-ANL (AFC)
Fuse Count: 8 fuses and 2 links come with the KNF-60x4 Max Load: 300A x 4
Finish: Black Chrome
Overview – KNF Series Fuse / Distribution Blocks use our compression fittings to secure the input and output cable connections. By changing the fitting type, the installer can select from 1/0 or 4 gauge input or output
Configuration – To setup your four way fuse block, install the Mini-ANL links across the lower center fuse platform, connecting the two center ports together. The two center ports are now your input and "pass through" port. The pass through port can be used to link your front battery to your rear battery(ies) in one seamless connection into the block. Fuses are then inserted from the center ports using the upper and vertical fuse platforms, connecting the upper and lower, left/right output ports.
Please see our compression fittings how to for more information regarding fitting/wire installation here http://www.knukonceptz.com/assets/Tech/knfhowto.pdf
Please click on a product quesion below to reveal the answer.
