KonFUSED 2 Way Power and Ground Distribution Block
The KNF60 uses 6 isolated ports in its patent pending design. Each is then linked, fused, or left open to configure the block for your application's demands. Utilizing three platforms to fuse or link these ports makes the KNF60 unlike any distribution block before it. Each output has room for two links or Mini-ANL fuses allowing up to 300A of protection per circuit!
Each port on the KNF60 is capable of accepting 0 gauge or 4 gauge power cable depending on the fitting used. Now power for the largest installations can be easily be routed through one block!
The KNF-60x2 is a two way fused power and ground distribution block in one. Included with this block are your choice if two fused outputs and 4 Mini-ANL Links to connect the three ground ports into one.
Total Ports: 6
Fittings Included: Four 0 Gauge, Two 4 Gauge
Fuse Type: Mini-ANL (AFC)
Fuse Count: 4 fuses and 4 links come with the KNF-60x2
Max Load: 300A x 2
Finish: Black Chrome
Overview – KNF Series Fuse / Distribution Blocks use our compression fittings to secure the input and output cable connections. By changing the fitting type, the installer can select from 1/0 or 4 gauge input or outputNotes – When installing power and ground into one confined area, please take extra caution connecting and installing fuses and links. It is best to configure the fuses and links prior to connecting the KNF-60 to either 12V power or ground sources until the unit is mounted and configured for your application.
Please see our compression fittings how to for more information regarding fitting/wire installation here http://www.knukonceptz.com/assets/Tech/knfhowto.pdf
Please click on a product quesion below to reveal the answer.